What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 25.06.2025 08:17

He then describes Rainy Season and Lightning.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
what exactly is a ‘surge’ protector?
What is the best way to get revenge on people who hurt you?
There are three different concepts here that are getting confused.
A circuit breaker is similar, but is resettable.
It seems Mohan does not understand the difference between a comment and an Answer.
Real-World GLP-1 Weight-Loss Results Differ From Trials - Medscape
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
For this case there are devices called Metal oxide varistors (MOV).
The 2025 Bootid meteor shower peaks June 27: Here's what to expect - Space
eight
but this device (an Inductor) … impedes the rapid changes in the current.
One
Dementia Risk Declining With Each Generation, Says Promising New Study - ScienceAlert
Here is a simplified AC power diagram.
First Sentence:
The other is “what does a “fuse” do?”
Aaron Rodgers says decision to sign with Steelers 'was best for my soul' - NFL.com
So, the voltage could go up to 500 volts, and the fuse will not open up.
the problem then depends on "how fast does the fuse operate?".
But it can get overloaded, and no longer works.
Fairphone 6 leaked renders implicate its modular design for easy repairs - Android Central
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
[old diagram got deleted by accident]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What are the best long-distance running shoes available in India?
[image of Common-mode choke]
but I think this circuit , shows a few more pieces.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What is one thing which you cannot stop however hard you try?
Upvotes:
I post the exact comment here.
These devices are installed between the “hot” and “neutral” and protective ground.
Fast-Track to Happiness: One Week of Micro-Acts Makes a Difference - Neuroscience News
It also is a device that limits the change in current flow.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
One is “what exactly is in a ‘surge protector’ ? ”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
There are two important concepts here.
These are simplified answers to the original question, and does not change anything I wrote above.
A Mix of These Specific Foods Could Help You Avoid Chronic Disease - ScienceAlert
Barnstars:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–10[John johnson John Johnson ]
WWE Raw GM Adam Pearce Announces Final Entrant In KOTR Tournament Match - Wrestling Inc.
This one hit behind the barn.
so, what happens?
2024–10–16 [ OO OLAOYE OYEBODE ]
"Can't Believe Virat Kohli Knew...": RCB's Celebrations Amid Stampede Row Heats Up - NDTV Sports
Edit 2024–10.
A fuse is a non-resetable over current circuit protector.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At one ohm, the resistor has a maximum of 1 watt power.
In schematic diagrams this is the symbol for a fuse:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
An AC voltage/ current source, and an ac inductive load.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
But… the neutral is now “floating” because of the 1 ohm resistance.
The MOV will conduct when the voltage exceeds 50% of line voltage.
The bolt then partially travels down the line to your home.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
At least they know the answer if they wanted it.
Because the load is inductive, the current lags the voltage.(by a bit).
nine
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This device then solves the entire problem.
What is lightning?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is 'the assistant's answer'
Now when you have a certain ac resistance, then a current flows in a loop.
He then describes the function of a fuse.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then asserts :
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
(Dc diagram shown, AC is similar).
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
a photo is worth a thousand words.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
The third is lightning and “how it gets conducted into a home.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is where the MOV conducts again, and dissipated the energy.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
What does a fuse do?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.